F100P/F200P
Programmable UV Flood Curing Lamp


The F100P/F200P is a programmable UV flood curing lamp. The F100P/F200P integrates all system components into a small lamp which can be easily mounted anywhere on a factory floor, with virtually no cabling or remote control boxes required. Just mount the lamp, connect the AC line cord, and start timed exposure curing! The system contains an integrated retractable shade type shutter, which allows for repeatable exposure timing, and shields the user from UV radiation.

The system’s LCD display and digital keypad make programming and monitoring of curing operations a snap. The long life 400/600-Watt metal halide type lamp and parabolic reflector illuminate an 8 x 6 inch curing area with evenly distributed 200mW/cm2 UVA light (320–390nm). The arc lamp is powered by the state of the art UV Power-Plus Lamp Driver.

Download Bulletin for F200P Programmable UV Light Curing System
Download Specification for UVA Metal Halide Lamp - Lamp Spectral Distribution


                   
                   
        Specification          
                   
        General          
        Model F200P        
        Order Number 290007        
                   
        Power Supply          
        Input Voltage 90-132/180-265VAC        
        Input Current, 120/240V 10A/5.0A maximum        
        Source Input Frequency 47 Hz to 63 Hz        
        Lamp Power Regulation ± 1%        
                   
        Lamp          
        Lamp Type 600 Watt Metal Halide        
        Lamp Voltage 140 ± 10V        
        Arc Length 32 mm        
        Burning Position Horizontal        
        Radiation Flux 110 Watts        
        Warm-up Time 2 minutes        
        Cooling time before restart 5 minutes typical        
        Curing Area 8 x 6'' minimum        
        Lamp Life 1000 hours typical        
                   
        Environmental          
        Operating Temperature +10 °C to +40 °C        
        Storage Temperature 0 °C to +60 °C        
        Relative Humidity 30 to 75% operating        
        Cooling Forced air        
        Over-temp shutdown 60°C (internal)        
                   
        Dimensions          
        L x W x H (inches) 11” x 10” x 9”        
        Weight (lbs.) 15 Pounds